( since Nov 19,2021 14:29:51 UTC – Information)
● Matters requiring attention about pump:
● 1. The pump is DC power supply. It is strictly prohibited to link straight to 220 V AIR CONDITIONING;
● 2. According to the pump specifications, the matching voltage, present and circulation size of the spray hole are chosen.
● 3. Take note of the instructions of water inlet and outlet. The pump needs to not be positioned in a damp location for a very long time.
● 4. No pollutants can get in the pump, otherwise it is simple to obstruct the pump, leading to pressure decrease and even no water.
● 5. It is not enabled to spray water straight on the motor. The motor is not ensured for water.
● 6. The water pump voltage change screw can not be changed at will, and the pressure has actually been changed prior to leaving the factory.
● 7. In order to prevent extreme heating and minimize the life span of the pump motor, it needs to work periodically.
● 8. When water freezes in winter season, do not utilize it with electrical energy.
● 9, after boiling water for one year, the pressure reduces and the volume of the spray is increased. The pump cover is opened and the little diaphragm is changed or changed by the diaphragm.
● 10. No gas, alcohol, destructive strong acid, strong alkali, seawater, vinegar, these are no issue.
● 11. The workplace temperature level of the pump: 0 ~ 60 ℃, the pump needs to not operate in the environment with too expensive humidity; do not utilize heat water or unclean water with temperature level greater than 60 ℃.
● 12. The pump is not a submersible pump and can not be utilized in water.
● 13. The pump can work periodically, however must not work continually for a very long time under pressure.The higher the load is, the much shorter the constant working time must be. It is advised that the constant usage time must not go beyond 30-60 minutes when there is a heavy load such as spray weapon( After screening, the pump in the lab environment, constant working limitation time can reach more than 3 hours)
Mist pump System List: 12V DC Self Priming Sprayer Pump + 12V power supply+ 6M( 20FT) Consisting Of – 3M Misting Hose Pipe Supply +3 M put together misting line with 6 brass misting nozzles; 6 nozzle seats; 20 Saddle clamps; 20 cable television ties + Direction + 3/4inch Basic water tap adapter +1 pc PTFE TAPE; (If the power adapter or devices are not set up, please call us in time)
Spray Parameters: American basic size, spray seat for moving locking quick push, can link 1/4 inch pipeline; nozzle is made from brass, nozzle aperture: 0.4 mm; thread size: UNC10-24, stainless-steel spray hole, rust avoidance, deterioration defense, environmental management, atomization impact is excellent, regular working pressure: 30PSI (2-3kg); it can be utilized alone, straight gotten in touch with faucet or gotten in touch with pump;
Application: spray system is commonly utilized, such as cooling, humidification, watering, watering, dust elimination, deodorization and cleansing. The scene consists of: yard, passage, garden, garden, swimming pool, theme park, caravan, trailer, cars and truck wash, shopping center, parks, synthetic landscapes, factories, workshops, and so on
Note: If there are any issues, you can call us right away. The pump and the spray system can be utilized independently and can be integrated. The pump outlet and the inlet are marked at the 2 ends.